just wondering if anybody had tried to remove the nose piece. i tried to remove it but seems hard and i dont want to pull it to hard maybe it will break, any right way of doing it?
I had the very same question when I was experimenting with the jaws, earpiece and etc...into different possible combos.( I finalized out with a mattle black main frame/polished black jaw with a +red lens, red icon and red hex head, I did this custom to give emphasis to the jaw -just like the other stock colorways)
Fortunately, the great customer service from the Manager himself of the Stoneridge O store showed me the correct way, as this was not shown on the instruction booklet.
3 easy steps and must be followed in sequence or it will not work:
Step 1: Unlock the Swichlock and swivel the jaw out-open to remove the lens
Step 2: remove the lens and leave the jaw open
Step 3: Push the nose piece back into the locking position, and since the jaw is out of place, the locking mechanism will not engage, then with a little extra push on the nose piece, it will snap right out without damage.
*important, do not try to remove the nose piece going the other way or it may break. Also, make sure the lens is out or you might accidentally drop the lens out